English
русский
gas assisted injection molding factory
Cold Runner MouldCompared with the hot runner mold, a cold runner mold does not require a special heating system for the runner system. It will be cooled with the product together and taken out after injection finishing, and then cut the runner, the cold runner mold is what we often call the traditional mold.More+
Slider of side core pulling mechanisum assemblingThe picture 1 shows a typical guide pin driven slider parting and core-pulling mechanism, we will talk about the composition and function of the lateral core-pulling mechanism.1. Lateral forming parts...More+
Transparent PC Injection MoldType-J thermocouple, the positive electrode of this thermocouple is pure iron, and the negative electrode is constant (copper-nickel alloy).More+
Medical Mold Injection ProductMedical devices have strict standards for molds, mainly involved in mold design, mold steel, manufacturing accuracy, sanitary production conditions, and transportation condition and many other aspects.More+
Gas-assisted injection molding product defects and solutionsCommon defects and solutions of gas-assisted injection moulding:1. Gas blows out the melt like in picture 1. Reason: insufficient pre-filled amount. When the plastic part is a locally thickened plate-...More+
Insert Mold PartsInsert molding is injected with plastic part processing, the insert can be plastic or metal, normally it will be metal parts or thread parts, they must be in a fixed area before injection, so it will be fitting very well after injection finishing. Normally these products request a high standard of strength.More+
