English
русский
Automotive handle mold supplier
Plastic injection mold cooling system design noticeDesign notice of designing the cooling system:1. Normal molds can be quickly cooled to obtain a shorter molding cycle, and precision molds can be slowly cooled with a mold temperature thermometer;2. U...More+
Well-ventilated steel of venting design for molded partsWell-ventilated steel is a sintered alloy, iIt is a porous material sintered with spherical particle alloys, the pore size is 7-10μm and the strength is poor, but the texture is loose which allow th...More+
Car Ceiling Handle Injection MouldWhen plastic injection molding, the melt is under the injection pressure and enters the mold cavity, on the same section, the flow rate of each gate is different, the fastest in the middle, the closer to the cavity wall, the slower the flow rate, and it contacts the cavity wall, the speed of the first layer is zero.More+
Cold Runner & Hot Runner Plastic MoldCommon Hot Runner Temperature Sensing Wires Types And CharacteristicsGenerally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensig wire is commonly known as the "thermocouple".More+
Limitations of gas-assisted injection molding technologyGas-assisted injection molding technology has obvious advantages in thick wall thicknes and tpipe parts, but this technology still has many limitations, which are mainly reflected in the following asp...More+
Automotive Water Intake Manifold MouldGas injection methods can be divided into two types, one is to inject gas together with the melt through the machine nozzle, and the other is to directly inject gas into the runner or cavity through the gas injection element (gas needle), the latter is divided into single-point intake and multi-point intake.More+