English
русский
Automotive handle mold supplier
Cold Runner & Hot Runner Plastic MoldCommon Hot Runner Temperature Sensing Wires Types And CharacteristicsGenerally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensig wire is commonly known as the "thermocouple".More+
About UsUSM is one of the world's leading manufacturers of plastic injection mould and molded parts. We have always pushed developments forward and set benchmarks in Automtive, High precision and 2K moldi...More+
Visual Doorbell Housing MoldLighting control can adjust the lighting of all rooms by pressing a few buttons, the scene function can realize various scene modes, and the full turn on and off function can realize the one-key to turn on and off functions of all lamps and lanterns.More+
Switch Cover Injection MoldThe K-type thermocouple is a metal thermocouple with strong oxidation resistance, which can measure the medium temperature of 0~1300℃, suitable for continuous use in oxidizing and inert gases, the short-term use temperature is 1200°C, and the long-term use temperature is 1000°C, the relationship between thermoelectric potential and temperature is approximately linear, and it is currently the biggest thermocouple.More+
Insert Mold PartsInsert molding is injected with plastic part processing, the insert can be plastic or metal, normally it will be metal parts or thread parts, they must be in a fixed area before injection, so it will be fitting very well after injection finishing. Normally these products request a high standard of strength.More+
Slider designing tips 2The molding parting surface of the slider molding should be made as a shut-off surface as possible, and the width of the shut-off part should be at least 8mm, and do not make a shut-off surface;When u...More+
Engine Coolant PipeIn the gas-assisted injection molding process, the gas always follows the path with the least flow resistance, from high pressure to low pressure, and flows to the thick wall part, because the temperature of this part is high and the resistance is small.More+
- Plastic Insert MoldThe easy formability and bendability of resin complement each other with the rigidity, strength, and heat resistance of the metal, and they can be made into complex and exquisite metal-plastic integrated products.More+
