English
русский
gas assisted injection molded products
Multi Cavity MoldMulti cavity mold requires very high machining accuracy. if the machining error of one single cavity is 0.01mm, and the total tolerance of 64-cavity processing will be very big. therefore, to make the multi-cavity mold request very advanced processing equipment in order to ensure the machining accuracy.More+
Video of CNC Machining Processing by Dongguan International Machine Tool Exhibition in 2021The 3rd China Machine Tool Purchasing Festival-DME Dongguan International Machine Tool Exhibition (hereinafter referred to as DME) was grandly closed at Guangdong Modern International Exhibition Center (Dongguan Houjie) on 13th Dec. 2021.More+
Automotive Water Intake Manifold MouldGas injection methods can be divided into two types, one is to inject gas together with the melt through the machine nozzle, and the other is to directly inject gas into the runner or cavity through the gas injection element (gas needle), the latter is divided into single-point intake and multi-point intake.More+
The principle of mold temperature balance in plastic mold cooling system designThe principle of mold temperature balance:1. Due to the complexity of the plastic parts and mold structure, it is difficult to make the temperature of the mold completely consistent, but should be mak...More+
Injection MoldingUSM is a professional one-stop service for plastic injection molding companies in China, with our rich experience by mold-making capabilities, we ensure that mass products can be manufactured in the shortest time.More+
Plastic injection mold runner system designThe gate is the connecting part between the runner and the cavity, and is also the end part of the injection mold gating system, the molten plastic enters the cavity and core side through the gate dir...More+
Slider angle designing tips1. Normally, all the insertion slopes of the slider are not allowed to be less than 3° to prevent excessive self-locking force and scratched;2. The angle of the locking surface must be bigger than th...More+
