English
русский
gas assisted injection molding moldflow
Auto Parts MouldThe automotive console is an external part in automotive interior parts, and no weld line on the part surface, the console's gating system generally uses a valve gate of hot runner system, the gate position usually has a direct injection gate on the non-critical surface which is to save plastic material, the shut-off area will be injected on side of the non-critical surface, or the middle area will be injected to the non-critical surface by the banana gate.More+
Banana gate of plastic injection mold runner system designIn order to get the best injection quality, the gate type must be selected carefully, the coommon gate tyeps are: direct gate, side gate, pin-point gate, sub gate,valve gate of hot runner etc. Among ...More+
The main design points of the design of the plastic mold pouring systemThe main runner is the part where the molten plastic first passes when it is sprayed from the injection nozzle, and it is coaxial with the injection nozzle, because of repeated contact and collision w...More+
Slider angle designing tips1. Normally, all the insertion slopes of the slider are not allowed to be less than 3° to prevent excessive self-locking force and scratched;2. The angle of the locking surface must be bigger than th...More+
The common fixing method of angle pinThe angle pin is a common part of the drive slider, and the fixing and installation methods as following:1. Pass through the mold plate directly and press the angle pin with the top plate to fix it, a...More+
Key points of plastic injection mold runner systemThe sub-runner is a transitional channel between the main runner and the gate, as the sub-runner is the longgest part of gating system, so it is very important to enhance the parts quality and improve...More+
Gas-Assisted Injection Molding in Plastic HangersGas-assisted molding is a plastic injection molding technology that injects gas into the plastic in a molten state, forming a cavity inside the plastic, thereby achieving the purpose of reducing weigh...More+
Video of Dongguan international machine tool exhibition in 2021USM (UNIQUE SOLUTIONS MOLD LIMITED) was founded in 2012 and is located in Dongguan City, Guangdong Province, a famous mould manufacturing province in China.More+
Water Tank MouldThe mold will be made welding process many times during modification, but it will reduce the accuracy and mold life a lot. some factories might use the normal steel to make manufacturing and then make real mold manufacturing after the first prototype mold work well, but it also influences the mold cost and delivery time.More+