0769-8539-0209 / +86-15158220988
Sales@usm-mold.com
En
UNIQUE SOLUTIONS MOLD LIMITED
UNIQUE SOLUTIONS MOLD LIMITED
32 Cavity Mold
Products
32 Cavity Mold
32 Cavity Mold
32 Cavity Mould
32 Cavity Mould
32 Cavity Mold 32 Cavity Mould

32 Cavity Mold

In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the success of multi-cavity molds.

Product material: ABS material in medical-grade

Mold steel: S136 HRC 52-54

Mold life: 1 million

Hot runner brand: mold master

Mold base: LKM

Surface finishing: texture

Mold lead time: 6 weeks


BUY INJECTION MOLD
Don't Hesitate to Contact Us Now.
Related Multi Cavity Mold
  • The common fixing method of angle pin
    May 11 2024
    The common fixing method of angle pin
    The angle pin is a common part of the drive slider, and the fixing and installation methods as following:1. Pass through the mold plate directly and press the angle pin with the top plate to fix it, a...
  • Slider spring hength and strength calculation
    Apr 23 2024
    Slider spring hength and strength calculation
    Processing size:1. ØD2=ØD+22. Ll = total spring length (L) - preload value of spring (N) - slider core pulling distance (L2)Spring length calculation: (refer to picture 1 for length calculation)★L...
  • The design requirements of slider wear plate
    Jan 03 2024
    The design requirements of slider wear plate
    1. The wear plate of slider requires hardening treatment, with a hardness of 45-48HRC;2. The friction surface of the wear plate is required to be 1.0mm higher than the slider surface (see picture-1);3...
What's New at USM-mold
  • The common fixing method of angle pin
    May 11 2024
    The common fixing method of angle pin
    The angle pin is a common part of the drive slider, and the fixing and installation methods as following:1. Pass through the mold plate directly and press the angle pin with the top plate to fix it, a...
  • Slider spring hength and strength calculation
    Apr 23 2024
    Slider spring hength and strength calculation
    Processing size:1. ØD2=ØD+22. Ll = total spring length (L) - preload value of spring (N) - slider core pulling distance (L2)Spring length calculation: (refer to picture 1 for length calculation)★L...
  • The design requirements of slider wear plate
    Jan 03 2024
    The design requirements of slider wear plate
    1. The wear plate of slider requires hardening treatment, with a hardness of 45-48HRC;2. The friction surface of the wear plate is required to be 1.0mm higher than the slider surface (see picture-1);3...